Speeding - Europes motorsport warehouse

without VAT/Customs duty may apply

Gearbox mount BMW ZF 6vxl - Volvo 240

Andersson Steel Speed


Gearbox mount BMW ZF 6vxl - Volvo 240 Top quality, rigid gearbox mount to fit a BMW ZF 6 speed gearbox in your Volvo 200 series. This gearbox mount fit perfect in your car and can handle all the power you possibly can produce. Engine / gearbox swap cannot be more straight forward than this.

I lager

3-5 days

£ 137.40
£ 123.66
{{ price }}

Reviews

Help others choose right. Be the first to write a review!

Write a review
Article no.: AS-002004-01

Gearbox mount BMW ZF 6vxl - Volvo 240

Top quality, rigid gearbox mount to fit a BMW ZF 6 speed gearbox in your Volvo 200 series.

This gearbox mount fit perfect in your car and can handle all the power you possibly can produce. Engine / gearbox swap cannot be more straight forward than this.

Fitment

Bolts directly into Volvo 200 series.
Used with 6 speed ZF gearboxes from early 90s to 2000.
Standard rear gearbox mount will be replaced with the new one included in this kit.
The Gearbox mount is flexible and can be mounted in several different ways to fit even more gearboxes.
The gearbox beam has a slim design to facilitate routing of exhaust pipes and other.

Example of common used gearboxes:
E90 / E91 320D (GS6-37DZ) and 325D / 330D (GS6-53DZ)
E60 and late E46 with GS6-37**
E60 320D (GS6-37**) 325D / 330D (GS6-53**)

Important notes

Always Make sure that the prop shaft lines perfectly with the support bearing after assembly. If not, the support bearing will wear prematurely and vibrations can occur.

Gearbox mount include

  • Zinc iron chromated and black-passivated 4mm High strength steel brackets
    These brackets withstand both corrosive environments and look good over time.
  • Rigid bushings made from the most suitable material
    Bushing material is a perfect mix where vibrations is reduced as much as it could but at the same time be able to handle massive power outputs.
  • All bolts and nuts needed for proper installation
    The included bolts have the same quality as rest of the parts and leaves nothing to chance

 

 

 

Andersson Steel Speed 

Andersson Steel & Speed develop their own manufactured model specific car parts. Such as brackets to fit gearbox, engine and brakes. The company ASS has been around for years and you can be sure to always get quality products.

More products from ASS:
#Engine / Gearbox mounts - #Brake caliper adapters - #AC-delete 

Read more about Andersson Steel Speed here

Be first to write a review about this product!

Your review:

To send a review, you must be logged in.