ACL Race Main bearings Ford 1,6 - 2,0 O.H.C (.25)
ACL
Reviews
Help others choose right. Be the first to write a review!
Write a reviewACL bearings are used for tuning and engine upgrades where you want better quality with higher bearing capacity than normal standard bearings.
Improvements of material, dynamic thickness, heat conduction, oil grooves and oil distribution are some of the points that make ACL one of the leading bearing manufacturers.
Bearing data
Part number: 5M2167H
Bearing size: .25
Bearing half type: Upper & lower
Bearing material: F780
Technical data (mm)
Max overall length: 23.75
Max shaft size: 57
Max tunnel size: 60.64
Max vertical oil clearance: 0.06
Max wall at crown: 1.803
Min shaft size: 56.99
Min tunnel size: 60.62
Min vertical oil clearance: 0.014
Technical data (in)
Max overall length: 0.935037509
Max shaft size: 2.244090021
Max tunnel size: 2.387396822
Max vertical oil clearance: 0.0023622
Max wall at crown: 0.070984111
Min shaft size: 2.243696321
Min tunnel size: 2.386609422
Min vertical oil clearance: 0.00055118
Engine code
JAC 1294cc / JCC 1294cc / JCT 1294cc / 1593cc TL16G / 1593cc TL16H / 1593cc TL16L / 1598cc TL16E / 1796cc TL18H / Cosworth YB (CH20) / 1993cc TL20CFI / 1993cc TL20EFI / 1993cc TL20H / 1993cc TL20L
Application
Ford 1294cc JAC TL13 Inline4 SOHC 2v
Ford 1294cc JCC TL13 Inline4 SOHC 2v
Ford 1294cc JCT TL13 Inline4 SOHC 2v
Ford 1593cc TL16G (GT) Inline4 SOHC 2v
Ford 1593cc TL16H (High Comp.) Inline4 SOHC 2v
Ford 1593cc TL16L (Low Comp.) Inline4 SOHC 2v
Ford 1598cc TL16E Inline4 SOHC 2v
Ford 1796cc TL18H Inline4 SOHC 2v
Ford 1993cc Cosworth YB (CH20) Inline4 DOHC 4v Turbo
Ford 1993cc TL20CFI Inline4 SOHC 2v
Ford 1993cc TL20EFI Inline4 SOHC 2v
Ford 1993cc TL20H (High Comp.) Inline4 SOHC 2v
Ford 1993cc TL20L (Low Comp.) Inline4 SOHC 2v
----------------
Guides & Info
| Bilmärke | Ford |
Be first to write a review about this product!
Your review:
To send a review, you must be logged in.
Associated products
